Foam Glass Board for Commercial & Industrial Buildings
Rigid closed-cell cellular glass insulation for flat roofs, façades, plaza decks, floors and demanding industrial building envelopes. Send us your assembly, load and thermal requirements for a project-specific product and specification review.
- Moisture-resistant insulation for long-service building assemblies
- High compressive strength options for load-bearing applications
- Stable inorganic material for demanding roof and façade systems
Include the application, thermal target, design load, project location and quantity.
One Insulation Material, Four Demanding Building Applications
The correct board specification depends on the complete assembly—not only the insulation thickness. Loads, attachment, waterproofing, substrate and project fire requirements should be reviewed before final selection.
Flat Roofs
Rigid insulation for commercial and industrial roofs where moisture resistance, dimensional stability and compressive performance are important.
Confirm: assembly, design load, thickness, waterproofing system and project standard.
Building Façades
Continuous-insulation routes for selected façade systems requiring an inorganic, vapor-resistant and dimensionally stable insulation layer.
Confirm: wall build-up, fixing method, cavity, fire requirement and finish.
Underground Structures Insulation
Closed-cell rigid insulation for foundations, ground slabs and below-grade walls, helping resist soil pressure, moisture ingress and long-term compressive loads.
Confirm: distributed and point loads, drainage, layer sequence and finish.
Interior Insulation
Rigid cellular glass board for interior walls, floors, ceilings and soffits, supporting thermal performance, vapor control and airtightness detailing.
Confirm: substrate, fixing method, board thickness, overhead installation detail, finish system and fire requirements.
Performance That Supports the Whole Assembly
Foam glass should not be selected from a single property. Its value comes from combining thermal insulation, moisture resistance, compressive capability and dimensional stability in one rigid inorganic material.
Closed-Cell Moisture Resistance
The closed-cell structure helps limit water and water-vapor movement through the insulation, supporting stable performance where moisture exposure is a major design risk.
High Compressive Strength
HUAYUE® foam cellular glass insulation is extraordinarily in-compressible without deformation even with long-term loads due to its cell geometry.
Dimensional Stability
Rigid cellular glass maintains its shape without fiber settlement. Correct joint treatment and complete system design remain essential.
Ecological
HUAYUE® foam cellular glass insulation is free of environmentally damaging flame retardants and propellants, no relevant eco-toxic components and without VOC or other volatile substances.
Select the Board by Assembly, Load and Thermal Target
Send the project variables that change product selection and quotation accuracy. Published values must come from the datasheet for the proposed grade.
Assembly
Roof, façade, deck, floor or industrial wall; include the layer build-up or drawing.
Performance
Thermal target, moisture exposure, fire requirement and service conditions.
Load
Maintenance traffic, equipment, paving, distributed loads and point loads.
Supply
Board dimensions, tolerances, quantity, packaging and delivery destination.
| Project factor | Why it matters | Information to send |
|---|---|---|
| Application and layer build-up | Determines whether board form and joint treatment fit the system. | Drawing, sketch or written assembly |
| Thermal target | Guides thickness and grade review. | Required U-value, R-value, RSI or thickness |
| Design load | Affects compressive-strength selection. | Distributed load, point load and safety requirement |
| Moisture conditions | Affects vapor and waterproofing design. | Indoor/outdoor conditions and exposure |
| Fire requirement | Must be matched to verified evidence. | Required classification or referenced standard |
| Board dimensions | Affects installation, joints and logistics. | Length, width, thickness and tolerance |
| Project location | Affects standards, packaging and delivery. | Country, city or destination port |
From Specification Review to Delivery Planning
Technical Review
Share drawings, a bill of quantities or performance requirements so the intended application and missing technical details can be identified.
Size & Fabrication
Standard and project-specific dimensions may be available subject to grade, quantity, tolerance and production review.
Packaging & Delivery
Discuss board dimensions, handling, unloading, delivery sequence and site storage before shipment.
Documentation Support
Applicable datasheets, reports and certificates can be supplied according to the proposed product and verified scope.
A More Responsive Route from Requirement to Supply
- Application-based recommendation
- Board grade and datasheet confirmation
- Custom size and fabrication review
- Sample discussion subject to availability
- Export packaging and loading planning
- Direct technical and commercial communication
Datasheets, Test Reports and Quality Documentation
Every standard, test value and certificate should be checked for product scope, issuing body, date and validity.
Technical Datasheet
Confirm grade, thermal data, compressive properties, dimensions, tolerances and declared service conditions.
Test Reports
Confirm the test method, tested specimen, result, laboratory and report date.
Quality-System Documents
Confirm certificate holder, site scope, validity and relevance to the supplied product.
Project Submittal Support
Request a document list aligned with the consultant, contractor or client requirement.
Building Project Questions
Is foam glass board suitable for every commercial roof?
No. Suitability depends on the complete roof build-up, design loads, waterproofing system, substrate, joints and project requirements. Send the assembly for grade and system review.
How do I select the required thickness?
Thickness should be based on the project thermal target and verified data for the proposed grade. Provide the required U-value, R-value, RSI or specified thickness and project location.
Can foam glass board support rooftop equipment or heavy finishes?
Selected grades may be used in load-bearing assemblies, but distributed loads, point loads, load-spreading layers and safety factors must be considered.
Can cellular glass be used in façade systems?
It can be considered for selected constructions. Fixings, joints, finish compatibility, cavity arrangement and required fire evidence must be reviewed as a complete system.
Can you provide custom board sizes?
Custom sizes may be possible subject to grade, quantity, tolerance and production review. Send dimensions and an application drawing for confirmation.
What should I provide for an accurate quotation?
Send the application, assembly or drawing, required performance, board dimensions, quantity, project location, document requirement and delivery destination.
- Roof, façade, deck, floor or wall application
- Thermal target or required thickness
- Distributed and point loads
- Board dimensions and quantity
- Required standard or document
- Delivery country or port
Need an expert? you are more than welcomed to leave your contact info and we will be in touch shortly.
